Top Blog list on Airo Shot Blast

Wire Flame spray is a robust and user-friendly wire metal spray system use for spraying both ferrous and non-ferrous material. It is the type of process in which uses an oxy-fuel flame to melt the wires.

THERMAL SPRAY is a general term for a group of processes in which metallic, cermet, ceramic, and some polymeric materials in the form of powder, wire, or rod are fed to a torch or gun with which they are heated to near or somewhat beyond their melting point.

Wire flame spray Gun Metco 12E (Metco Metalizing Gun) uses a single wire that is entered in a jet flame. The temperature is close to 10,100 K, melting the wire. The air stream from the jet atomizes the molten particles, falling them onto the substrate.

Twin Arc spray gun is a process that uses an electric arc to melt the wires. The molten metal is then atomized with compressed air to create a spray stream that applies the coating onto the surface being coated.

The Powder Flame Powder Spray process works a comparable technique as the Flame Wire Spray method, but that the wire feedstock is replaced by a powder.

Metalizing gun prices vary according to models. The metalizing spray gun is known as thermal spray coating, is widely used in preventing the corrosion of metals. Metal wire or powder is filled at a measured rate into a flame or arc spraying process and the atomized metal impinges upon the surface being coated and becomes bonded to it.

Boiler Tube Coating is a must to increase the life of boiler tubes. The Thermal spray-on boiler tube coating technology gives high-temperature wear & corrosion protection coating on the boiler tubes

The gas flow meter is a highly accurate and reliable instrument for regulating and measuring the flow of both oxygen and fuel gas in a manual powder and wire thermal spray gun.

Wire Flame Spray Gun comes first in the siphon plug and then in the nozzle, it completely holds the wire. The siphon plug should be cleaned occasionally. Wipe out the grooves and clean out the holes with the proper size wires from the cleaning wire kit.

Sand Blast Cabinet is a cabinet consisting of many components use for sandblasting the substrate surface. Sandblasting is a process in which blasting abrasives is sand. Sandblasting Cabinet is a cabinet having all-in-one features.

In the Pressure Blasting Cabinet, There is a pressure pot at the bottom of the Sandblasting hopper. In Pressure, pot pressure is created towards the abrasive & compressed air through a mixer tube.

Suction Blasting Cabinet works on the phenomenal process of suction. In this, the gun has two inlet holes, one for abrasive suction & another one for creating a vacuum.